advanced power n-channel enhancement mode electronics corp. power mosfet low on-resistance bv dss 25v simple drive requirement r ds(on) 9m fast switching characteristic i d 57a rohs compliant & halogen-free description absolute maximum ratings symbol units v ds v v gs v i d @t c =25 a i d @t c =100 a i dm a p d @t c =25 w t stg t j symbol value units rthj-c maximum thermal resistance, junction-case 3 /w rthj-a 62.5 /w rthj-a maximum thermal resistance, junction-ambient 110 /w data & specifications subject to change without notice storage temperature range operating junction temperature range -55 to 175 -55 to 175 thermal data parameter maximum thermal resistance, junction-ambient (pcb mount) 3 201003022 1 total power dissipation gate-source voltage + 20 continuous drain current, v gs @ 10v 57 continuous drain current, v gs @ 10v 40 pulsed drain current 1 parameter rating drain-source voltage 25 a p73t02gh/j-hf 50 halogen-free product 160 g d s to-252(h) the to-252 package is widely preferred for commercial-industrial surface mount applications and suited for low voltage applications such as dc/dc converters. the through-hole version (ap73t02gj) is available for low-profile applications. g d s a dvanced power mosfets from apec provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. g d s to-251(j)
electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =250ua 25 - - v v gs =10v, i d =30a - - 9 m v gs =4.5v, i d =20a - - 16 m v gs(th) gate threshold voltage v ds =v gs , i d =250ua 1 - 3 v g fs forward transconductance v ds =10v, i d =30a - 40 - s i dss drain-source leakage current v ds =25v, v gs =0v - - 10 ua i gss gate-source leakage v gs =+ 20v, v ds =0v - - + 100 na q g total gate charge 2 i d =15a - 14 22 nc q gs gate-source charge v ds =20v - 2.5 - nc q gd gate-drain ("miller") charge v gs =4.5v - 9.5 - nc t d(on) turn-on delay time 2 v ds =15v - 9 - ns t r rise time i d =30a - 85 - ns t d(off) turn-off delay time r g =3.3 ? ,v gs =10v - 20.5 - ns t f fall time r d =0.5 ? - 12.5 - ns c iss input capacitance v gs =0v - 710 1130 pf c oss output capacitance v ds =25v - 300 - pf c rss reverse transfer capacitance f=1.0mhz - 220 - pf r g gate resistance f=1.0mhz - 1.9 - source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =30a, v gs =0v - - 1.2 v t rr reverse recovery time 2 i s =10a, v gs =0 v , - 25 - ns q rr reverse recovery charge di/dt=100a/s - 15 - nc notes: 1.pulse width limited by max. junction temperature 2.pulse test this product is sensitive to electrostatic discharge, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized. apec does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. apec reserves the right to make changes without further notice to any products herein to improve reliability, function or design. 2 3.surface mounted on 1 in 2 copper pad of fr4 board ap73t02gh/j-hf r ds(on) static drain-source on-resistance 2
a p73t02gh/j-h f fig 1. typical output characteristics fig 2. typical output characteristics fig 3. on-resistance v.s. gate voltage fig 4. normalized on-resistance v.s. junction temperature fig 5. forward characteristic of fig 6. gate threshold voltage v.s. reverse diode junction temperature 3 0 20 40 60 80 100 02468 v ds , drain-to-source voltage (v) i d , drain current (a) t c =175 o c 10v 7.0v 6.0v 5.0v v g =4.0v 0 40 80 120 160 024681012 v ds , drain-to-source voltage (v) i d , drain current (a) t c =25 o c 10v 7.0v 6.0v 5.0v v g = 4.0v 0.4 0.8 1.2 1.6 2.0 -50 0 50 100 150 200 t j , junction temperature ( o c) normalized r ds(on) i d =30a v g =10v 0 10 20 30 0 0.2 0.4 0.6 0.8 1 1.2 1.4 v sd , source-to-drain voltage (v) i s (a) t j =25 o c t j =175 o c 4 6 8 10 12 246810 v gs , gate-to-source voltage (v) r ds(on) (m ) i d =20a t c =25 o c 0.0 0.4 0.8 1.2 1.6 -50 0 50 100 150 200 t j , junction temperature ( o c) normalized v gs(th) (v)
ap73t02gh/j-h f fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. switching time waveform fig 12. gate charge waveform 4 1 10 100 1000 0.1 1 10 100 v ds ,drain-to-source voltage (v) i d (a) t c =25 o c s in g le puls e 100us 1ms 10ms 100ms dc 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 10 t , pulse width (s) normalized thermal response (r thjc ) p dm duty factor = t/t peak t j = p dm x r thjc + t c t t 0.02 0.01 0.05 0.1 0.2 duty factor = 0.5 single pulse 0 2 4 6 8 10 0 4 8 12 16 20 24 q g , total gate charge (nc) v gs , gate to source voltage (v) i d =15a v ds =12v v ds =15v v ds =20v 0 200 400 600 800 1000 1 5 9 1317212529 v ds ,drain-to-source voltage (v) c (pf) f=1.0mhz c iss c oss c rss q v g 4.5v q gs q gd q g charge t d(on) t r t d(off) t f v ds v gs 10% 90% operation in this area limited by r ds(on)
|
